Browse
  • APPENDIXB
    POST-OCCUPANCY COMMISSIONING REPORTING

    The provisions contained in this appendix are not mandatory unless specifically referenced in the adopting ordinance.

    SECTIONB101
    GENERAL

    B101.1 Post-occupancy report requirement.

    Post-occupancy commissioning reporting shall be provided in accordance with Table B101.1 The post-occupancy commissioning reports shall be provided to the owner and shall be made available to the code official upon request. Any actions taken to address deficiencies cited in the post-occupancy commissioning reporting shall be solely at the discretion of the owner or the owner’s authorized agent, except where other more restrictive requirements exist in the jurisdiction.

    TABLE B101.1

    POST-OCCUPANCY COMMISSIONING REPORTING

    CONSTRUCTION OR SYSTEM REQUIRING VERIFICATIONMETHODOCCURRENCEGOVERNING SECTION(S)
    Chapter 4: Site Development and Land Use
    Stormwater management system operationField inspectionSee maintenance plan403.1
    Erosion and sediment controlField inspectionSee maintenance plan405.1.1
    Hardscape and shading provided by structures and vegetationField inspection and reportSee maintenance plan408.2
    Vegetative roofsField inspection and reportSee maintenance plan408.3.2
    Chapter 6: Energy
    Energy consumption, monitoring, targeting and reporting
    CalibrationCommissioning, testing and review and evaluation or test reportsAnnually where required in maintenance plans603, 610.1
    Mechanical systems—buildings over 5,000 square feet total building floor area
    a. Balance HVAC systems (both air and hydronic)HVAC system installer, TAB/contractor and commissioning providerWhere required in maintenance plans611.7.1, 611.7.2 and through reference to IECC
    b. Functional performance testing of HVAC equipmentHVAC system installer/contractor and commissioning providerWhere required in maintenance plans611.1, 611.3, 611.3.1, 611.4.3,611.6, 611.7, 611.7.2 and through reference to IECC
    c. Functional performance testing of HVAC controls and control systemsHVAC system installer/contractor and commissioning providerWhere required in maintenance plans611.1, 611.3.2, 611.7 and through reference to IECC
    Lighting
    CalibrationSystem installer/contractor and commissioning providerWhere required in maintenance plans611.3.2, 611.9.2, 611.9.2.1,611.9.2.2 and through reference to IECC

    For SI: 1 square foot = 0.0929 m2.